Specialized reducer for powder separator machine

When choosing the model of the special reducer for the powder separator, two aspects should be taken into consideration: 

The output shaft diameter of the servo motor selected should not be larger than the largest diameter indicated on the table for use. 

2. After conducting the torque calculation, the rotational speed can meet the normal operation requirements. However, if there is a deficiency when the servo reaches its full output, we can implement appropriate current-limiting control on the driver located beside the motor, or apply torque protection on the mechanical shaft. This will reduce some of the impacts. 

For the powder separator, since it needs to provide high-intensity pressure during operation, all components of the machine must be selected appropriately. The selection of the reducer must be based on the corresponding type and specification, meeting conditions such as strength and thermal balance, so as to ensure the normal and stable operation of the powder separator. 

The above is the relevant introduction of Jinxiang reducer manufacturer. Jiangsu Jinxiang Transmission Equipment Co., Ltd. is a professional manufacturer specializing in the research and production of reducers. Welcome to come for consultation!